RestoFinish Epoxycoat Grey 7 Litre Kit

RestoFinish Epoxycoat primer is an essential part of any car restoration, it’s a non-porous, high-bonding sealer that can be applied over bare clean metal and mixed surfaces. Epoxy seals oxygen from the metal preventing corrosion forming.

High quality 2 part Epoxies include zinc phosphate which increases the corrosion inhibiting properties even further. Ideally used where metal has recently been exposed or project vehicles will be unpainted for a duration of time.

RestoFinish Epoxycoat is a two component epoxy primer suitable for use over prepared steel surfaces. Epoxycoat is a non-toxic anti-corrosive zinc phosphate coating. It is ideal in situations where resistance to chemical, solvents and aggressive environmental conditions are required.

When used as a high build 4:1+25% Epoxy Reducer (4 parts A to 1 part B) the film build is 75 microns per coat, resulting in a far thicker coating than traditional epoxies.  The 150 microns (2 coats) of the Restoration specific epoxy creates the perfect foundation, minimising cut throughs during the filler stage.   

Where less build is required Epoxycoat can be reduced with RestoFinish Epoxy Reducer (up to 40%).

Direct to Metal
Over existing coating
Sealer
High Building
Anti-Corrosive
Zinc-Phosphate
Solvent resistant.

Kit Includes:
4 Litres of Grey Epoxycoat Part A 
1 Litre of Epoxycoat Hardener Part B 
2 Litre of Epoxy Reducer

*Always refer to the appropriate product technical data sheet prior to use

RestoFinish Epoxycoat TDS