Easy Phos 5L

Oxytech’s EASY PHOS is a one step phosphate, degreaser and sealer for bare metal protection. EASY PHOS is specifically formulated as a pre-paint treatment for steel, galvanised steel and aluminium and is easily applied by aerosol, spray gun or brush. EASY PHOS, when dry, protects the surface from surface rust, fingerprints, etc during temporary indoor storage (usually for 6 months or more). EASY PHOS performs a conversion of the metal surface by the deposition of a phosphate layer, which is then sealed with a purpose-formulated organic polyphosphate. Most powder coatings and solvent based paints used to coat steel and/or aluminium are compatible with EASY PHOS. 

Australian Made

5L

Coverage: 1 Litre of EASY PHOS will treat up to 30m² of surface (pressurised, air feed spray gun). Heavier application will reduce this considerably.

EASY PHOS Material Safety Data Sheet

EASY PHOS Technical Data Sheet

*We do not currently ship this product outside of Australia, please allow 14 days for deliveries to Western Australia
** Please allow an additional 7 working days for delivery to regional Western Australia

***Orders sent to Western Australia and Northern Territory may incur a dangerous goods surcharge, please contact us to confirm before placing your order

FAQ
Q: Can you body fill straight over Easy phos?
A: Technically yes however best practice would be to Epoxy first.

Q: Can you paint straight over Easy Phos?
A: Yes, however if it is more than 24 hours you will need to follow usual surface preparations, wipe with a clean cloth, thinners/isopropyl alcohol